Allnet ALL2272 Panduan Instalasi Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Kamera IP Allnet ALL2272. Allnet ALL2272 14 halaman. Day/night pan/tilt ip camera
Juga untuk Allnet ALL2272: Panduan Pengguna Firmware (12 halaman)

Halaman Cetak

Focus Adjustment Ring: Adjust the focus ring to get a clear image.

Reset: When the device is powered, press the Reset Button to reboot the device, or hold the Reset Button

for 10 seconds to set the settings back to factory default

Install the hardware and connect all cables

b. Connect all cables

b1. Without Power over Ethernet (PoE) connection

(ALL2272)

1. Connect the power adaptor to the IP Camera.

2. Using a standard RJ-45 network cable, connect the IP

Camera

to a normal Hub / Switch / Router.

b2. Power over Ethernet (PoE) (ALL2272 )

1. Using a standard RJ-45 network cable, connect the IP

Camera

to a PoE-enabled Hub / Switch / Router

b3. Wireless connection (ALL2272 )

1. Connect the power adaptor to IP Camera.

2. Connect to Wi-Fi

www.allnet.de

ALL2272 QIG

b 1

b 2

b 3