365SMART SM-06-02015R Manual Asli - Halaman 10

Jelajahi secara online atau unduh pdf Manual Asli untuk Alat Ukur 365SMART SM-06-02015R. 365SMART SM-06-02015R 20 halaman. Cross line laser cube

6. KNOW YOUR MACHINE

1. Key board and indication light

2. Laser window

3. Lock switch

Before insert four pieces of AA batteries correc-

tly,Please make sure Lock Switch at ' ' position.

And please keep the Lock Switch at '

during moving the laser level or storage it.

It is very important!

Auto Self-leveling Mode

1. Turn Lock Switch at '

horizontal laser beams both light up, and the

machine will be self-leveling. Key indication

light is green, If key indication light is red, and

lines flash, it indicates the lines is not level,

please put laser level on much flatter place,

because the self-leveling rang is about 40)

2. Press the key button, horizontal laser beam

' position

' position, vertical and

4. Battery compartment

5. 1/4' mounting thread

close, vertical laser beam keeps light.

3. Press the key button again, horizontal laser

beam light up, vertical laser beam close.

4. Press the key button again, horizontal and

vertical laser beam both light up.

5. Turn Lock Switch at '

stop working.

Inclined line Mode

1. When Lock Switch at „

button, vertical and horizontal laser beams

both light up and flash every 5 seconds , the

indication light is red.

2. Press the key button, horizontal laser beam

close, vertical laser beam keeps light.

3. Press the key button again, horizontal laser

beam light up, vertical laser beam close.

4. Press the key button again, horizontal and

vertical laser beam both light up. Move in

circles

5. In this case, you can get any inclined single

' position, laser level

", position, press key