DIAL CASS-PNL-09-12 Panduan Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pendingin Udara DIAL CASS-PNL-09-12. DIAL CASS-PNL-09-12 4 halaman. For cassette panel

Halaman Cetak
1.Before Installation
When the air panel is unpacked, place it on insulation material
etc. to protect sealing insulation from scratches.
Factory-Supplied Accessories
Check to ensure that the following accessories are packed
with the air panel.
Name
Long Screw (M6×50)
Installation manual
If any of these accessories are not packed in the packing,
please contact Dial Manufacturing, Inc.
2. Installation
2.1 Location of Suspension Bracket
Check to ensure that the suspension brackets of the indoor unit
are located approximately 1 mm higher than the false
Refer to the indoor unit manual for details.
2.2 Removing Air Intake Grille from Air Panel
Step1
Open the air intake grille to an angle of approximately 45°from
the surface of the air panel as shown in Fig.2.1.
AirIntake Grille
CornerPlate (4)
Fig. 2.1 Removing Method of Air Intake Grille
*
Do not touch the air louver during installation work.
*
Do not try to remove the grille while it is at an angle of 90
from the surface of the air panel .
Step2
Lift the grille keeping it inclined, and remove it in a
forward direction.
Qty
Purpose
4
For Fixing Panel
1
Installationguide
10
AirPanel
Grab
NOTE
2.3 Installing Air Panel
Step1
Remove the corner plate.
Pull part ① in the direction of arrow shown in the figure below
to remove the corner plate.
Step2
Set the position indicated as "Ref. Pipe" on panel to the
refrigerant connection portion of indoor unit .
Step3
Mount the air panel onto the suspension leg of indoor unit by using
the factory-supplied fixing screws (M6 long screws).
ceiling.
Electric Box
o
Step4
Make sure the dimension between bottom surface of indoor unit
and false ceiling is 30mm. (See Fig2.4 )
2
①
Fig. 2.2
IndoorUnit
Refrigerant Piping
LongScrew
Marked with "Ref. Pipe"
(×4)
Fig. 2.3Installation
Hook
Panel