Allo.com GSM Series Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kartu PCI Allo.com GSM Series. Allo.com GSM Series 20 halaman. Digital telephony card

GSM Digital Telephony Card User Manual – Version 1.0

GSM Driver Installation

To install the Linux support files, use the following steps:

1. Download the gsm driver from the link

http://www.allo.com/firmware/gsm-card/allo_gsm_DEC_19_13.tar

2. Copy the tar file to /usr/src

3. Extract the file using "tar –xvf allo_gsm.tar"

4. Change the prompt to allo_gsm directory "cd allo_gsm"

5. Run the script "./install.sh <asterisk source directory path>", so that

the driver installation will be done automatically

6. Run the asterisk (#asterisk -cvvvvvvv), you can also run asterisk in

silent mode (#asterisk).

Start Asterisk and load the GSM Gateway Card with the following command

(usually asterisk will load the module by default, unless it configured as not to

load in the modules.conf), and also check whether GSM Gateway card is

located; also output of the command is shown below.

Note1: Make sure the gsm module is loaded by default; this can be

checked by giving the following command

Note2: Please make sure the provided sample configuration files are

present before starting asterisk

*CLI> module show like chan_gsm.so

If the module is not loaded key in the below command

*CLI> module load chan_gsm.so

Now you can able to use the GSM Card with the Asterisk.

WWW.ALLO.COM

Page 14