Dialighting IW19-10 ZOOM Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan DJ Dialighting IW19-10 ZOOM. Dialighting IW19-10 ZOOM 20 halaman.

Enter MENU mode, select Special Functions, press the ENTER button to confirm, use the

UP/DOWN button to select Fixture Maintenance or Factory Setting.

Fixture Maintenance

To select Fixture Maintenance, press the ENTER button to show the FIXTURE

MAINTENANCE on the display. Use the UP/DOWN button to select Interval or Remain Time.

Interval

To select Interval, press the ENTER button to confirm, the interval time will be shown on the

display. Press the MENU button to exit.

Remain Time

To select Remain Time, press the ENTER button to confirm, the remaining time will be shown

on the display. Press the ENTER button to confirm, use the UP/DOWN button to select Exit or

Reset time, press the MENU button to exit.

Factory Setting

To select Factory Setting, press the ENTER button to show the FACTORY SETTING on the

display. Press the ENTER button to confirm, use the UP/DOWN button to select No or Yes (the

fixture will reset to factory settings and exit menu mode).

3.3 Home Position Adjust

In the main functions, hold the ENTER button for at least 3 seconds into offset mode, use the

DOWN/UP button up to select Pan Offset, Tilt Offset or Zoom Offset, and press the ENTER button

to confirm. Use the DOWN/UP button to adjust the home position of the Pan, Tilt or Zoom, Once

the position has been selected, press the ENTER button to setup, to go back to the functions

without any change press the MENU button again. Press and hold the MENU button about one

12D