Dialog DA1458 Series Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mikrokontroler Dialog DA1458 Series. Dialog DA1458 Series 19 halaman.
Halaman CetakUM-B-008
DA1458x Production Line Tool reference CLI
7.6 stoptest
Description: This is the Bluetooth SIG standardized [2] HCI_LE_Test_End command. It is used:
●
after a cont_pkt_tx command to end the standard packet TX test mode.
●
after a start_pkt_rx command to end the standard packet RX mode and report the number of
received packets.
Syntax: prodtest –p <COM_PORT_NUMBER> stoptest
Example:
prodtest –p 14 stoptest
Output example (the number of packets is always zero when executed after a cont_pkt_tx):
status = 0
number_of_packets = 0
Output example (when executed after a start_pkt_rx):
status = 0
number_of_packets = 4360
7.7 unmodulated TX
Description: starts a Continuous Wave (CW) or unmodulated TX test.
Syntax: prodtest –p <COM_PORT_NUMBER> unmodulated TX <FREQUENCY>
Parameters:
●
FREQUENCY is an even integer between 2402 and 2480. E.g. 2480 corresponds 2.480 GHz.
Example:
prodtest -p 14 unmodulated TX 2404
Output example:
status = 0
7.8 unmodulated RX
Description: starts the unmodulated RX test.
Syntax: prodtest –p <COM_PORT_NUMBER> unmodulated RX <FREQUENCY>
Parameters:
●
FREQUENCY is an even integer between 2402 and 2480. E.g. 2480 corresponds 2.480 GHz.
Example:
prodtest -p 14 unmodulated RX 2404
Output example:
status = 0
7.9 unmodulated OFF
Description: stops unmodulated TX or RX test.
Syntax: prodtest –p <COM_PORT_NUMBER> unmodulated OFF
Example:
prodtest -p 14 unmodulated OFF
Output example:
User manual
CFR0012-00 Rev 1
Revision 1.7
8 of 19
Company confidential
18-Nov-2015
© 2015 Dialog Semiconductor GmbH