ALLOWANCE 100 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol ALLOWANCE 100. ALLOWANCE 100 15 halaman. Television time manager

The display is flashing "PA", indicating that the Master Parental Access Code must be entered. This code is

used to place the TV Allowance in PARENT MODE.

To set the Master Parental Access Code when the display is flashing "PA" enter the four digits and press the

ENTER key.

If you make a mistake or wish to change the four digits you entered then keep pressing digits until the display

shows the access code you want to use and then press the ENTER key. You may also press the CLEAR key to

start the process over; this will make the TV Allowance flash "PA" again.

For example: If you wanted to set the Master Parental Access Code to be 1478 you would press the following

keys.

Key(s) Pressed

1478

ENTER

After the ENTER key is pressed the display will flash "C1". This indicates that the access code for child one

should be set.

3.4. FLASHING "C1" – SET ACCESS CODE FOR CHILD ONE

The display is flashing "C1", this indicates that the access code for child one must be entered. This code is used

when a child wants to use the TV Allowance.

To set the access code for child one enter four digits and press the ENTER key.

If you make a mistake or wish to change the four digits you entered then keep pressing digits until the display

shows the access code you want to use and then press the ENTER key. You may also press the CLEAR key to

start the process over, this will make the TV Allowance flash 'C1" again.

For example: If you wanted to set the access code for child one to be 9999 you would press the following keys.

Key(s) Pressed

9999

ENTER

After the ENTER key that set the access code for child one is pressed the display will flash "A1". This indicates

that the weekly time allowance for child one should be set.

3.5. FLASHING "A1" – SET WEEKLY ALLOWANCE

The display is flashing "A1", this indicates that the hours and minutes of the weekly time allowance for child

one should be entered.

To set the hours and minutes of the weekly time allowance for child one enter four digits and press the ENTER

key. The first two digits are the hours and the second two digits are the minutes.

If you make a mistake or wish to change the four digits you entered then keep pressing digits until the display

shows the time allowance you want to use and then press the ENTER key. You may also press the CLEAR key

to start the process over; this will make the TV Allowance flash "A1" again.

Action Taken

This causes the display to show 1478

This sets the Master Parental Access Code to 1478.

Action Taken

This causes the display to show 9999.

This sets the access code for child one to 9999.