Alloy POE2000S S Series Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Konverter Media Alloy POE2000S S Series. Alloy POE2000S S Series 10 halaman. 10/100/1000base-tx to 1000base-sx/lx and sfp converter poe power provider

Halaman Cetak

7. LED Description

The following table describes the LED's located on the POE200 Series media

converter.

LED

FX LNK/ACT

TP LNK/ACT

Green

TP SPD

Amber

PWR

PoE PSE-TP

15.4W

8. DIP Switch and Reset Button

Fig. 11 Reset button and S1—Bit 1, 2, 3 Configuration and Setting

Reset :

Once S1-1, S1-2 is changed, please press this button to have

the settings take effect.

S1-1 Bridge mode :

S1-2 LFP

S1-3 PoE ON/OFF :

Note:

1. S1-1 :

Cut through mode supports jumbo frame size up to 9216Bytes.

Normal mode supports frame size up to 2048 Bytes

2. S1-3 :

Must be set to PoE ON to supply power to PD device.

Colour

Lit when fibre connection is present

Green

Blinks when fibre data is present

Lit when TP connection is present

Green

Blinks when TP data is present

Green Lit when TP speed is 1000Mbps

Amber Lit when TP speed is 100Mbps

Off when TP speed is 10Mbps

Lit when 5V power is applied

Green

Lit when PoE feeding power is active

Lit when PoE feeding power is disrupted

Red

(In case of overtemperature/overcurrent )

Green

Light when PD Class Type is Class 1

Green

Light when PD Class Type is Class 2

Green

Light when PD Class Type is Class 0 or 3

Cut through (default) or Normal

LFP enabled(default) or disabled

Enable(default) or disable

Function