Dialog Semiconductor SLG46824 Manual Pemrograman - Halaman 11

Jelajahi secara online atau unduh pdf Manual Pemrograman untuk Motherboard Dialog Semiconductor SLG46824. Dialog Semiconductor SLG46824 15 halaman. In-system

Halaman Cetak

1. Hardware Requirements

ISPG-SLG46824/6

SLG46824/6

Programming Algorithm for the Emulated EEPROM Space

The SLG46824 and SLG46826 programming algorithm for the emulated EEPROM

Sequential Write commands, each of which will program one 16 byte page of NVM memory.

Data "1" cannot be re-programmed as data "0" without erasure. Each byte can only be programmed one time without erasure.

Programming of the emulated EEPROM



Block Address for emulated EEPROM

is 010b)



With emulated EEPROM

Word Address =

Word Address +

Figure 10: Flowchart for Programming EEPROM without Acknowledge Polling

(Note 2)

follows a similar flow to programming of the NVM with two differences:

(Note 2)

is 011b (in contrast to the NVM Configuration Registers Block Address, which

(Note

2), all 16 pages are user accessible.

Control Code = XXXXb

Data = Data + 01H

Block Address = 000b

Word Address = E3H

Control Code = XXXXb

Block Address = 011b

Word Address = 00H

10H

Revision 1.1

(Note 2)

VDD

POR Delay

Yes

Data = 9FH?

Page Write

Command

Wait 20ms

Sequential

Read for

Verify

Data

Correct

Yes

Word

Address

= E0H?

Yes

Done

11 of 15

space consists of a series of I

Fail

4-Mar-2019