Alloy LED AL-60-03-0008 Spesifikasi & Petunjuk - Halaman 7
Jelajahi secara online atau unduh pdf Spesifikasi & Petunjuk untuk Beralih Alloy LED AL-60-03-0008. Alloy LED AL-60-03-0008 7 halaman. Led wifi controller hub
Halaman Cetak
P18
.
RGB/White Brightness Slider (P21)
This button can be used in the RGB and CDW color wheels: the following shows
c. pause&run button(P19)
RGB as an example.
Running button exist in RGB, CDW color wheel interface, they
are similar so here will take RGB as an example to explain.
1. Short press the "W" button.
Attention
2. Brightness level can be adjusted from 0-255 to an accurate color.
Note: Before adjusting the color using the color sliders, the LEDs may already
be displaying an existing color, so you will need to clear each channel first: move
the slider in each channel to any level, then move it back to zero. The RGB light-
ing will then turn off, which means the channels have been cleared successfully.
P18
P19
P18
e. RGB/CDW brightness level line(P21)
This button exist in RGB/CDW interface, they are similar, so
18)
here will take RGB as an example to explain.
c. pause&run button(P19)
1)Short press the button
Running button exist in RGB, CDW color wheel interface, they
c. pause&run button(P19)
W (White) Button (P22)
2)Brightness level can be adjusted
are similar so here will take RGB as an example to explain.
Running button exist in RGB, CDW color wheel interface, they
from 0-255 to an accurate color.
are similar so here will take RGB as an example to explain.
Running & Pause button
Attention
Attention
This button only exists in the RGB-W/RGB color wheel, when using RGB-W
Before adjust the color by color line, LED might in already in
Attention
tape light, to adjust the White channel brightness. Long press the W button
an existing color, so we need zero clearing each channel first:
Fastest speed
moving each channel in any level between 1-225, then move it
turn the White channel on or off independently. You must use the W button to
back to zero, then RGB lighting will off which means zero
adjust the brightness of the W channel independently.
clearing successfully.
Moving speed
adjust libe
f. W button(P22)
This button only exists in RGB channels color wheel interface to
adjust W channel brightness independently.
Lowest speed
Long press W button
In RGB color wheel interface,it only adjusts R,G and B three channels
brightness,and cannot adjusts W channel.We need use W button
e. RGB/CDW brightness level line(P21)
P19
to adjust W channel brightness independently.
This button exist in RGB/CDW interface, they are similar, so
e. RGB/CDW brightness level line(P21)
here will take RGB as an example to explain.
This button exist in RGB/CDW interface, they are similar, so
g. Brightness button(P23)
here will take RGB as an example to explain.
1)Short press the button
Brightness button exist in RGB, CDW and CCT color wheel
interface.
Brightness Button (P23)
2)Brightness level can be adjusted
1)Short press the button
from 0-255 to an accurate color.
In CDW and CCT color wheel interface, it adjusts all channels
2)Brightness level can be adjusted
brightness.
from 0-255 to an accurate color.
Attention
The Brightness button exists in the RGB-W/RGB, CDW and CCT color
Before adjust the color by color line, LED might in already in
Attention
an existing color, so we need zero clearing each channel first:
wheels. It adjusts the brightness of all channels.
Before adjust the color by color line, LED might in already in
moving each channel in any level between 1-225, then move it
an existing color, so we need zero clearing each channel first:
back to zero, then RGB lighting will off which means zero
moving each channel in any level between 1-225, then move it
clearing successfully.
back to zero, then RGB lighting will off which means zero
clearing successfully.
f. W button(P22)
This button only exists in RGB channels color wheel interface to
f. W button(P22)
adjust W channel brightness independently.
This button only exists in RGB channels color wheel interface to
adjust W channel brightness independently.
Long press W button
to ON/OFF W channel independently.
Save/Recall Button (P24)
In RGB color wheel interface,it only adjusts R,G and B three channels
Long press W button
brightness,and cannot adjusts W channel.We need use W button
In RGB color wheel interface,it only adjusts R,G and B three channels
to adjust W channel brightness independently.
brightness,and cannot adjusts W channel.We need use W button
Save
to adjust W channel brightness independently.
g. Brightness button(P23)
1. Select a room/zone.
Brightness button exist in RGB, CDW and CCT color wheel
g. Brightness button(P23)
interface.
2. Select a color or a color-changing mode.
Brightness button exist in RGB, CDW and CCT color wheel
interface.
3. Short press the Save button.
In CDW and CCT color wheel interface, it adjusts all channels
brightness.
4. Long press one of the buttons from S1 to S8.
In CDW and CCT color wheel interface, it adjusts all channels
brightness.
5. The LED lighting will flash to indicate the setting has been saved successfully.
Recall
1. Select a room/zone.
2. Short press the Save button.
3. Short press one of the buttons from S1 to S8.
4. The LED lighting will display the saved setting.
to ON/OFF W channel independently.
www.AlloyLED.com
Page 7 of 7
Moving speed
adjust libe
choose successfully, multiple rooms can be choose at same time
®
®
Lowest speed
P19
b. color wheel
18)
There will be four different color wheels we can select if we did
not edit the room: RGB, CDW, CCT, Single color.
1)Slide the upper areas from top to down to choose color wheel
Running & Pause button
from one to one. (P16,P17)
Running & Pause button
Fastest speed
Fastest speed
Moving speed
adjust libe
Moving speed
adjust libe
Lowest speed
Lowest speed
P19
18)
d. music(P20)
The highest,a low voice
will affect the moving
speed lowest
to ON/OFF W channel independently.
to ON/OFF W channel independently.
h. Save button(P24)
1.Save
1)Select rooms/zones
2)Select color or moving modes
|
Call: 800.910.LEDS [5337]
3)Short press save button
4)Long press any button of S1-S8
5)LED lighting will flash indicate save successfully.
Short press middle of zone picture
2
Mark on the upper right side of room picture to indicate
3
Press room button again be confirm the rooms' selection
4
Upper area will indicate room's name we selected.
5
d. music(P20)
The highest,a low voice
will affect the moving
speed lowest
P15
P16
W
P21
P20
P23
h. Save button(P24)
1.Save
1)Select rooms/zones
P21
P22
2)Select color or moving modes
3)Short press save button
4)Long press any button of S1-S8
5)LED lighting will flash indicate save successfully.
2.Recall
1)Select rooms/zones
100% brightness
2)Short press save button
3)short press saved button in S1-S8
4)LED will indicate saved color or moving modes
1% brightness
P23
| Text: 510.400.6690
The highest,a low voice
will affect the moving
speed lowest
P29
P15
P16
P15
d. music(P20)
When choose
open your local music
The highest,a low voice
will affect the moving
The lowest,need a high
speed lowest
voice affect moving speed.
P21
P20
P17
When choose
,it will
open your local music
palyer
P23
The lowest,need a high
h. Save button(P24)
P22
voice affect moving speed.
1.Save
1)Select rooms/zones
P21
2)Select color or moving modes
3)Short press save button
4)Long press any button of S1-S8
5)LED lighting will flash indicate save successfully.
100% brightness
2.Recall
1)Select rooms/zones
2)Short press save button
100% brightness
3)short press saved button in S1-S8
4)LED will indicate saved color or moving modes
W channel's
1% brightness
brightness level
1% brightness
P23
h. Save button(P24)
1.Save
1)Select rooms/zones
2)Select color or moving modes
3)Short press save button
4)Long press any button of S1-S8
5)LED lighting will flash indicate save successfully.
2.Recall
1)Select rooms/zones
2)Short press save button
3)short press saved button in S1-S8
4)LED will indicate saved color or moving modes
P24
|
When choo
open your l
palyer
The lowes
voice affec
P20
P17
P16
100%
W cha
brightn
,it will
When choo
1% bri
palyer
open your l
palyer
The lowest
voice affec
P22
P20
100% brightness
100% brightness
100% b
W channel's
brightness level
W chan
1% brightness
brightn
1% brightness
1% brig
P
P22
100% brightness
1% brightness
P24
P
v2.3