AllPondSolutions 500-HO+ Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Sistem Penyaringan Air AllPondSolutions 500-HO+. AllPondSolutions 500-HO+ 17 halaman. Aquarium hang-on filter with uv

Filter Media

Important!
Always use water from your fish tank to clean your filter media.
When cleaning mechanical or biological media, NEVER rinse with tap water or
use any soap or detergent, only your aquarium water. The best time to rinse your
filter media h is when doing a 10 / 20% water change as you can use this water
to wash the media through.
When replacing media in your filter, do not replace more than 50% of your
media at once. This is to ensure that the nitrifying bacteria present in the old
media are able to repopulate in the newly added filter media.
Important - Always use water from your fish tank to clean your filter media - do
not use mains water or any cleaning products to clean your media.
Switch off your filter at the mains and unplug the
unit. Pour out water from inside the HO+ filter.
Lift the filter cover and remove the red media
holder from the filter. (image 6)
Wash the floss filter pad, filter foam and any
additional basket media with water from your
tank in a bowl. Gently squeeze the floss filter
pad and filter foam to remoce any build up - this
will not remove all of the beneficial bacteria that is on the sponge, which is
what is protecting your fish from ammonia in the water, so you can wash the
sponge until the water moving through it runs clear.
Replace your media into the holder and return it into your filter. Put the filter
cover back onto the top of your filter.
Switch your filter back on.