AllPondSolutions 600-HO Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Sistem Penyaringan Air AllPondSolutions 600-HO. AllPondSolutions 600-HO 17 halaman. Aquarium hang-on filter

Halaman Cetak

Do not attempt to modify this unit in any way and

only use the recommended parts for replacement.

Before installing, maintaining or handling your

equipment, or before placing your hands in your

aquarium, ensure that the unit is disconnected from

the electricity supply.

Always unplug any electrical devices when not in

use.

Carefully examine your ﬁlter after installation. Do not

plug in the unit to the mains if there is water on any

parts not intended to be wet.

The power cable must

have a drop loop to avoid

any condensation build up

reaching the mains (see

diagram 1). If the plug

does get wet, DO NOT

unplug the cord.

Disconnect the fuse or

circuit breaker that

supplies power to the

appliance. Then unplug and examine for presence

of water in receptacle.

When positioning your hang on ﬁlter, make sure the

unit is securely attached to the tank before

switching it on.

If the plug or unit does get wet, DON'T unplug the

cord. First, disconnect the circuit breaker or fuse that

supplies power to the appliance. Next, unplug and

inspect for water presence in the receptacle.