AllPondSolutions EFX+ Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Akuarium AllPondSolutions EFX+. AllPondSolutions EFX+ 20 halaman. Aquarium external filters

To ensure your new external ﬁlter is set up and running correctly, and to prevent

any accidental damage or injury, please read and follow the below instructions

carefully before using your product.

SAFETY

IMPORTANT!

Disconnect the mains electricity supply before attempting any installation /

maintenance of any kind. Do not attempt to modify this unit in any way and only use the

recommended parts for replacement.



The external ﬁlter should never be run dry as this will cause the unit to overheat

and cause permanent damage.



All connections must be earthed.



The power cord of this appliance cannot be replaced; if the cord is

damaged, the appliance should be discarded. Never cut the cord.



Do not connect to any voltage other than that stated.



This ﬁlter is suitable for indoor household aquariums only (do not use in exterior

locations, swimming pools, ponds, bathrooms etc). Do not place in liquids other than

water.



Do not use with water above 90°F or 30°C.



Do not carry or pull the unit by its electrical cable.



Do not use this unit if it has a damaged cord or plug, if it is malfunctioning or it is

dropped or damaged in any manner



Do not yank cord to pull plug from outlet. Grasp the plug and pull to disconnect.

Always unplug an appliance from an outlet when not in use.



Do not attempt to modify this unit in any way and only use the

recommended parts for replacement.



Before installing, maintaining or handling your equipment, or before placing your hands

in your aquarium, ensure that the unit is disconnected from the electricity supply.



Always unplug any electrical devices when not in use.



Carefully examine your ﬁlter after installation. Do not plug in the unit to the mains if

there is water on any parts not intended to be wet.