Dialogic D/120JCT-LS Spesifikasi - Halaman 3

Jelajahi secara online atau unduh pdf Spesifikasi untuk Aksesori Telepon Dialogic D/120JCT-LS. Dialogic D/120JCT-LS 8 halaman. Jct media boards

Halaman Cetak
Dialogic
D/120JCT-LS Media Board
®
Platform — PCI Express
Form factor
Power Requirements — PCI Express
+3.3 VDC
+12 VDC
Environmental Requirements — PCI and PCI Express
Operating temperature
Storage temperature
Humidity
Telephone Interface
†
Trunk type
Impedance
Ring detection
Loop current range
Echo return loss
Crosstalk coupling
Speech digitization
Frequency response
Connector
Approvals and Compliance
Hazardous substances
Safety
Canada
United States
Europe
International
EMC
Canada
United States
Europe
Japan
Telecom Approvals
Canada
United States
European Union
Japan
PCI Express x1 lane configuration (or higher)
12.28 in. (31.2 cm) long
4.2 in. (10.67 cm) high
1.12 A typical, 1.4 A maximum
800 mA typical, 900 mA maximum
+32°F (0°C) to +122°F (+50°C)
-4°F (–20°C) to 158°F (+70°C)
8% to 80% noncondensing
Loop start
Ground start for inbound applications with AC ringing
600 Ohms nominal
40 Vrms to 130 Vrms, 15.3 Hz to 68.0 Hz (each configurable by parameter**)
20 mA to 60 mA, (Euro) 20 mA to 120 mA, polarity insenstive
17 dB minimum (at country impedance)
>–75 dB
64 kbit/s, µ-law PCM
300 Hz to 3400 Hz ±3 dB (transmit and receive)
RJ-25, 6-port, 6-position
RoHS Compliance Information at
A Guide to RoHS Compliance at Dialogic
CSA 60950-1
UL 60950-1
EN 60950-1
IEC 60950-1
ICES-003 Class A
FCC Part 15 Class A
EN55022/EN55024, CISPR22/CISPR24, ETSI EN 300386
VCCI Class A
CS-03
FCC Part 68
TBR 21
JATE Blue Book
3
Datasheet
JCT Media Boards