Miller AlumaPower 450 MPa Panduan Pemilik - Halaman 37
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pengelasan Miller AlumaPower 450 MPa. Miller AlumaPower 450 MPa 49 halaman. Arc welding power source. 400 volt model
Halaman Cetak
7-5. Pulsed MIG - Wire and Gas Selection Table
WIRE TYPES*
Aluminum
*Wire diameter in inches (mm). Refer to section 6-2 to change displayed units.
.
Other normal gas mixtures can be used by adjusting arc length and sharp arc. Use the program closest to your gas mixture and wire type and
size.
Notes
.
A complete Parts List is available at www.MillerWelds.com
.035 (0.9) AL4X (4000 Series)
.040 (1.0) AL4X (4000 Series)
3/64 (1.2) AL4X (4000 Series)
1/16 (1.6) AL4X (4000 Series)
.035 (0.9) AL49 (4943)
.040 (1.0) AL49 (4943)
3/64 (1.2) AL49 (4943)
1/16 (1.6) AL49 (4943)
.035 (0.9) AL5X (5000 Series)
.040 (1.0) AL5X (5000 Series)
3/64 (1.2) AL5X (5000 Series)
1/16 (1.6) AL5X (5000 Series)
GAS TYPES
ARGN (ARGON)
ARGN (ARGON)
HE AR25 (HELIUM/ARGON)
OM-257219 Page 31