Miller Auto Deltaweld 452 Panduan Pemilik - Halaman 29
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pengelasan Miller Auto Deltaweld 452. Miller Auto Deltaweld 452 30 halaman. 60 hz, 50/60 hz arc welding power source
Juga untuk Miller Auto Deltaweld 452: Panduan Pemilik (40 halaman), Panduan Pemilik (42 halaman)
Halaman Cetak
OPTIONS AND ACCESSORIES
A variety of optional controls and accessories allow you to tailor your Deltaweld power source to meet your specific needs. All
are specifically designed to be used with Deltaweld Series power sources, so you never have to worry about compatibility.
REMOTE ON/OFF CONTROL
(#042 869)
Allows you to turn your Deltaweld on or
off from a distance of 20 ft. (6 m). This
is especially useful if your power
source is located up in a mezzanine.
Connects to the power source's
terminal strip.
POLARITY CONTROL
(#042 871)
This dual−function control is designed
for use with dual wire feeders or any
application where electrical isolation
and/or polarity reversing of weld
current is required. Both functions can
be used at the same time.
STANDARD RUNNING GEAR
(#042 886)
The large 10 in. (254 mm) rear wheels
and 5 in. (127 mm) front casters on this
running gear provide excellent mobility
on the shop floor, making it easier to
move the power source around and
over cables and cracks. Very easy to
install. Handles double as weld cable
holder.
ROUGH TERRAIN RUNNING
GEAR
(#043 043)
This two−wheel running gear features
pneumatic tires for extra mobility.
Handles double as a cable holder.
INTERNATIONAL CABLE
ADAPTER
(#168 077) Female 1 Qty.
Dinse brand insulated female twist lock
connector installs on output stud,
providing quick disconnect of
secondary weld cables.
(#042 418) Male 1 Qty.
Cable mounted Dinse brand insulated
male twist lock connector accepts #1
or #2 AWG cable sizes.
CYLINDER RACK/LIFT
(#043 005)
Miller's patent pending cylinder rack
features a lift which moves the
cylinders up onto the rack and into
position without manual lifting! The
rack accommodates two cylinder
bottles, and can be attached directly to
the running gear.
STANDARD CYLINDER RACK
(#042 887)
Installs on standard running gear.
WELD CABLE HOLDER
(#043 055)
Attaches to front of power source,
allowing weld cables to be stored near
the control panel.
AIR FILTER KIT
(#042 939 Field)
Protect your Deltaweld from dusty, dirty
environments with this reusable air
filter that easily attaches and detaches
from the front of the power source.
METER CERTIFICATION
(#042 968 Factory)
These digital meters are certified to an
exact standard. Often required for
government work.
GROUND CURRENT SENSOR
(#042 983 Factory)
(#043 146 Field)
Disables power source if weld current
is present on primary ground.
ENVIRONMENTAL
PROTECTION PACKAGE
(#043 049 Factory)
Internal machine components are
sprayed with a protective polyurethane
coating.
BALANCING/PARALLELING
CONTROL
(#042 810)
Allows you to parallel two Deltawelds.
The control balances the power
source's output amperage throughout
its operating range. This control plugs
directly into the Deltaweld power
supplies, and is especially useful for
customers who need higher
amperages (for Submerged Arc).
GMAW/FCAW WELDING
S−22P12 WIRE FEEDER
(#125 616)
Compact, lightweight 24 VAC constant
speed semi−automatic wire feeder
provides portability and access.
Primarily designed for gas−shielded
wires. Accommodates up to a 30 lb.
(13.6 kg), 12 in. (304 mm) diameter
spool. See literature, Index No. M/7.0.
S−22A WIRE FEEDER
(#115 396)
Lightweight, 24 VAC constant speed
semiautomatic wire feeder, best suited
for small diameter wires.
Accommodates up to a 60 lb. (27.2 kg)
spool of welding wire when using
optional wire reel assembly. See
literature, Index No. M/6.9.
60 SERIES WIRE FEEDERS
Heavy−duty, industrial, constant speed
24 VAC semiautomatic wire feeders in
dual or single models, with available
digital meters. Ideal for high duty cycle
GMAW and FCAW. Accommodates a
wide variety of wire sizes and types.
See literature, Index No. M/2.0.
SWINGARC™ BOOM−MOUNTED
WIRE FEEDERS
Single and dual 24 VAC semiautomatic
wire feeders are available with 12 ft.
(3.7 m) and 16 ft. (4.9 m) booms. Ideal
for long reach and complete
maneuver−ability when working on
large weld−ments, or in hard−to−reach
areas. See literature, Index No. M/13.0
EXTENSION CABLES FOR
14−PIN PLUGS TO 14−PIN
SOCKETS
(#122 972) 10 ft. (3 m)
(#122 973) 25 ft. (7.6 m)
(#122 974) 50 ft. (15.2 m)
(#122 975) 75 ft. (22.8 m)
This extension cord makes a direct
connection between the power source
and the accessory control. No messy
splicing or adapting required.
WATER COOLANT
SYSTEMS
RADIATOR 1A
(#042 492) 115 VAC
RADIATOR 2A
(#042 493) 230 VAC
For use with water−cooled torches
rated up to 500 Amps. For more
information, see the Miller Coolant
Systems literature sheet, Index No.
AY/7.2.
WATERMATE 1A
(#042 495) 115 VAC
For use with water−cooled torches
rated up to 500 Amps. Vertical design
conveniently mounts to Miller cylinder
rack in place of one cylinder. For more
information, see the Miller Coolant
Systems literature sheet, Index No.
AY/7.2.
COOLMATE 4
(#042 288)
For use with water−cooled torches
rated up to 600 Amps. Tough molded
polyethylene case with carrying
handle. For more information, see the
Miller Coolant Systems literature sheet,
Index No. AY/7.2.
2/95