Miller Coolmate 1.3 Panduan Pemilik - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pengelasan Miller Coolmate 1.3. Miller Coolmate 1.3 28 halaman. Recirculating coolant system for water-cooled gtaw torches and gmaw guns
Juga untuk Miller Coolmate 1.3: Panduan Pemilik (20 halaman)
Halaman Cetak
4-9.
Mounting Cooler To A 2 Wheel Trolley
allen_set
needlenose
knife
heavy-duty workclamp
stripcrimp
3/8 in.
socket wrench
hammer
airgun
vicegrip
punch
�
Complete Parts List is available at www.MillerWelds.com
tools/
1
flathead
philips head
steelbrush
light-duty workclamp
2
Ref. 805506-B
drill
handream
awl
crimper
feelergauge
solvent
pinextractor
wrench
crescent wrench
nutdriver
chippinghammer
wirecutter
greasegun
filterwrench
file
flashlight
ruler
eprompuller
pipewrench
Disconnect input power before
mounting cooler.
Dispose of used coolant according
to national, state, and local codes.
Do not pour down drain.
NOTICE – Do not run cooler without coolant
in tank.
1 Small Runner Cart ‒ Part No. 300971 ‒
Not Supplied
2 Screws
Use .250-20 x .50 Hex Head screws sup-
plied with cart to secure cooler to cart.
frontcutter
paintbrush
OM-257811 Page 11