Miller CST 280 VRD International Panduan Pemilik - Halaman 21
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pengelasan Miller CST 280 VRD International. Miller CST 280 VRD International 48 halaman. Arc welding power source
Halaman Cetak
3-9. TIG Lift-Arct DCEN (Direct Current Electrode Negative) Connections
1
7
2
1
Connect work lead to positive weld
output terminal.
4
2
5
6
Connect TIG torch to negative weld
output terminal.
3
3
4
Open valve slightly so gas flow
blows dirt from valve. Close valve.
5
6
Typical flow rate is 15 cubic feet per
hour (7.1 liters per minute).
Connect
regulator/flowmeter .
7
Valve controls gas preflow and
postflow. Open valve on torch just
before welding.
Positive (+) Weld Output
Terminal
Negative (−) Weld Output
Terminal
Gas Cylinder
Cylinder Valve
Regulator/Flowmeter
Flow Adjust
torch
gas
hose
to
Gas Valve
Tools Needed:
11/16 in, 1-1/8 in, (21 mm)
803 943-A
OM-217 655 Page 17