Miller XMS 403 Panduan Pemilik - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pengelasan Miller XMS 403. Miller XMS 403 44 halaman. 400 volts ce arc welding power source
Halaman Cetak
4
6
1
Warning! Watch Out! There are
possible hazards as shown by the
symbols.
2
Disconnect input plug or power before
working on machine.
2
1
=
3
Wear approved safety glasses with
side shields while working on the unit.
4
Plugged filter or hoses can cause
overheating to the power source and
torch.
1
1
3
1
2
S-176 106
2
3
100 h. std.
(B) 050024004
956 142 617
5
Every 100 hours, check and clean filter
and check condition of hoses.
6
Read Owner's Manual.
7
Use coolant suggested by
manufacturer.
1
Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2
Falling unit can cause injury.
Do not move or operate unit
where it could tip.
3
Cylinders can expolde if
damaged. Protect
compressed gas cylinders
from excessive heat,
mechanical shock, slag, open
flames, sparks, and arcs.
1
Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2
Moving parts can cause injury.
Keep away from moving parts
such as fans.
5
7
OM-244 243 Page 7