Miller XR-15W Panduan Pemilik - Halaman 21
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pengelasan Miller XR-15W. Miller XR-15W 36 halaman. With quick disconnect ce, 200/400 ampere air/water push-pull welding gun
Halaman Cetak
6-4. Coolant Supply For Water-Cooled Models Only
3
2
Application
Coolant
*HF: High Frequency Current
**MILLER coolants protect to -37
1
GTAW Or Where
HF* Is Used
MILLER Low
Conductivity Coolant
No. 043 810**
°
°
F (-38
C) and resist algae growth.
1
Coolant Supply
2
Coolant "In"
3
Coolant "Out"
See table below for coolant
guidelines.
Turn On coolant supply before
welding.
Turn Off coolant supply when
finished welding.
GMAW Or Where Coolant
Contacts Aluminum Parts Or
Where HF* Not Used
MILLER Aluminum Protecting
Coolant No. 043 809**;
Distilled Or Deionized Water OK
°
°
Above 32
F (0
C)
Ref. 150 755-A
OM-236297 Page 17