Miller XR-Pistol-Plus Panduan Pemilik - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pengelasan Miller XR-Pistol-Plus. Miller XR-Pistol-Plus 32 halaman. Air and water-cooled guns
Halaman Cetak
4-1. Gun Specifications
Model
Welding Output Range
XR- Pistol - Plus Gun
200 A at 100% Duty Cycle
(Air Cooled)
with 15, 25 or 35 ft
(4.6 or 7.6 m) gun
XR- Pistol - Plus Gun
400 A at 100% Duty Cycle
(Water Cooled)
with 15, 25 or 35 ft
(4.6 or 7.6 m) gun
.
When using 1/16 in. (1.6 mm) wire, kit 230708 must be installed.
.
Instructions are for MPa Plus feeders with 14-pin gun connections.
4-2. Environmental Specifications
A. Temperature Specifications
Operating Temperature Range
14 to 104 °F (−10 to 40°C)
4-3. Duty Cycle And Overheating
100% Duty Cycle At 200 Peak Amperage Using 100% Argon Gas w/15, 25 Or 35 Foot Guns
100% Duty Cycle At 400 Peak Amperage Using 100% Argon Gas w/15, 25 Or 35 Foot Guns
OM-248663 Page 6
SECTION 4 − SPECIFICATIONS
Air-Cooled Models
Continuous Welding
Water-Cooled Models
Continuous Welding
Electrode
Wire Feed
Wire Diameter
Speed Range
Capacity
.030 To 1/16 in.
50 To 780 ipm
(0.8 To 1.6 mm)
(1.3 To 19.8 mpm)
aluminum wire
.030 To 1/16 in.
50 To 780 ipm
(0.8 To 1.6 mm)
(1.3 To 19.8 mpm)
aluminum wire
Storage Temperature Range
−4 to 131 °F (−20 to 55°C)
Net Weight
(Torch Only)
2.5 lb (1.1 kg)
(less cables)
2.9 lb (1.3 kg)
(less cables)
Temp_2016- 07
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
NOTICE − Exceeding duty cycle
can damage unit and void warranty.
sduty1 5/95