Miller Classic Series Panduan Pemilik - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Aksesori Pengelasan Miller Classic Series. Miller Classic Series 32 halaman. Welding helmet
Juga untuk Miller Classic Series: Buku Petunjuk (20 halaman)

Miller Classic Series Panduan Pemilik
SECTION 8 − MAINTENANCE AND STORAGE
NOTICE − Do not use solvents or abrasive cleaning detergents to clean the helmet. Do not immerse
the lens assembly in water.
NOTICE − Keep helmet dry; do not expose helmet to rain or snow. Keep helmet away from fire and
other sources of heat.
NOTICE − The auto-darkening lens uses sensitive electronics. Do not drop helmet or handle it in
a rough manner.
The helmet requires little maintenance. However, for best performance clean helmet after each use.
Using a soft cloth dampened with a mild soap and water solution, wipe the cover lenses clean. Allow
to air dry. Occasionally, the filter lens and sensors should be cleaned by gently wiping with a soft,
dry cloth.
Store helmet in a clean, dry, cool place free of solvent−based vapors. To prevent battery from losing
power, store helmet in helmet bag or in a dark location. Remove battery(s) if helmet will be stored
longer than six months.
End Of Useful Life
The welding helmet has no expiration date, and with proper care and maintenance it can provide
many years of eye and face protection. The helmet can continue to be used, provided that the helmet
shell/shroud is undamaged (no cracks, gaps, or holes) and the lens functions normally
(switches
from a light state to a dark state.)
helm main 2019-05
Notes
OM-252052 Page 21