Miller T94i XL Series Panduan Pemilik - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Aksesori Pengelasan Miller T94i XL Series. Miller T94i XL Series 40 halaman. Auto-darkening helmets

Miller T94i XL Series Panduan Pemilik
5-3.

Mode Button And Grind/Low Battery/Memory Function Light

2
The auto-darkening lens on T94 Series
helmets automatically turns on (dark-
ens) when welding begins and turns
off when welding stops.
1 Mode Button
Press Mode button to check if the lens is
working properly and to begin Mode and Info
adjustments.
When the Mode button is pressed, the hel-
met control display will appear. Do not use
the helmet if the lens does not function as
described. See Section 11-1.
(R)
MEMO ( B )
1
1
2
2 Grind / Low Battery Light / Memory
Function
The Grind / Low Battery / Memory Function
light blinks when the lens is in the Grind
mode. Light stays on when 2-3 days of bat-
tery life remain.
If battery power is low, replace with CR2450
lithium battery (1 required for T94/T94i and 2
required for T94i XL - Miller Part No.
217043). See Section 8-1.
OM-255503 Page 13