Miller 1038 Panduan Operator - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Operator untuk Aksesori Kamera Miller 1038. Miller 1038 12 halaman. Fluid head
Halaman Cetak
Operating Instructions
4
P a n / T i l t D r a g C o n t r o l .
The Compass 25 Fluid Head offers 5 selectable positions of fluid drag
+ zero setting in the Pan and Tilt. The settings are equally stepped
from light drag in position 1 up to heavy drag in position 5, the drag
plates are completely disengaged in position zero.
•
Do not Pan or Tilt the Fluid Head whilst adjusting PAN or TILT
DRAG CONTROL or whilst the PAN & TIL DRAG CONTROL is
between settings.
•
The drag setting can be changed at any tilt or pan angle.
5
P a n / T i l t L o c k C o n t r o l .
The Compass 25 Fluid Head offers high capacity caliper disc brake
system to hold the Fluid Head in a fixed pan and/or tilt position.
Camera position will not change when applying or releasing the Pan /
Tilt locks.
•
Do not pan or tilt the Fluid Head whilst the PAN or the TILT
LOCK is partially applied.
Illumin ation.
6
The Compass 25 Fluid Head offers illumination of the BUBBLE
LEVEL when the low ambient light conditions exist. Illumination can
be achieved by pressing the ILLUMINATION BUTTON once. The light
will switch off after 10 seconds.
Tilt Drag Control
Fig. 7
9
Counterbalance Selector
Illumination Button
Bubble Level
Pan Drag Control