Miller 1505 Panduan Operator - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Operator untuk Aksesori Kamera Miller 1505. Miller 1505 8 halaman. Solo tripod series solo dv 75mm 2-stage alloy tripod solo dv 75mm 2-stage carbon fibre tripod solo eng 100mm 3-stage tripod
Juga untuk Miller 1505: Panduan Operator (8 halaman)

Halaman Cetak

Tripod Setup (cont)

Mid Position

Note: This refers to the mid leg

angle position, not necessarily the

height of the tripod.

The SOLO RAPID LOCK tripod has three

leg angle positions. The middle leg angle

position (Fig.7) is self-engaging after

closing leg from fully spread position

(Fig.6). The mid position is chosen for

optimum stability in the 50-130cm tripod

height range, but is not recommended if

the tripod is being used in a crowded

situation, due to the

wide diameter, or

footprint spread, of the

extended tripod.

Tripod Pull Down

1 Remove camera from fluid head.

Fig 5 Leg angle adjuster

2 Close the tripod legs so all are pointing

raised

3 Holding the bowl, lower tripod to its

4 Close legs together fully (Fig. 1) fit leg strap and return tripod to

Fig 6 Spread Position

straight down and disengage all

concentric locks.

shortest length and re-engage

concentric locks.

carry bag if finished shooting.

Fig 7 Middle leg

angle position