Miller cineline 70 Panduan Operator - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Operator untuk Aksesori Kamera Miller cineline 70. Miller cineline 70 17 halaman. Fluid head

Operating Instructions

3 Camera Set-up

3.1 Remove the CAMERA PLATE by pressing and holding

the SAFETY RELEASE KNOB then pulling the SIDE LOAD

LOCK LEVER outwards. Lift the SAFETY LATCH LEVER

and remove the CAMERA PLATE from the BASE PLATE.

3.2 Attach the CAMERA PLATE to the camera and securely

tighten the screws. Refer to the Camera's owner's

manual for correct method of attachment to the CAMERA

PLATE.

3.3 Attach camera accessories and the battery to the camera,

it is recommended to estimate the camera's Centre of

Gravity (C o G) for the purpose of correctly positioning

the camera on the CAMERA PLATE. The camera's C o G

can be estimated by placing the camera on to a round rod

and then shifting it backwards or forwards until a balance

point – C o G – is achieved. It is recommended to identify

this point on the CAMERA PLATE as it will be useful in

step 3.5.

Slide Lock Pad

Side Load Lock Lever

Safety Release Knob

Safety Latch Lever

Safety Latch

Lock Screw

Adjusting Screw

Fig. 6