Miller Digital Performance Series Panduan Pemilik - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Aksesori Sepeda Motor Miller Digital Performance Series. Miller Digital Performance Series 32 halaman. Auto-darkening helmets
Juga untuk Miller Digital Performance Series: Manual (32 halaman), Manual (28 halaman)
Halaman Cetak
1-1. Mode Control
4-3.
Mode Control
1
A Digital Elite lens is shown.
1
Mode Control Button
Press Mode button to select the mode
appropriate for the work activity:
Weld Mode
used for most welding
applications. In this mode the lens
�
A Digital Elite lens is
turns on when it optically senses a
shown.
welding arc. Adjust shade, sensitivity,
and delay settings as needed.
1 Mode Control
Cut Mode
used for cutting applica-
Press Mode button to select
tions. In this mode the lens turns on
the mode appropriate for the
when it optically senses a cutting arc.
work activity:
Adjust shade, sensitivity, and delay
settings as needed.
Weld Mode- used for most
welding applications. In this
Grind Mode used for metal grinding
mode the lens turns on when
applications. In this mode the shade is
it optically senses a welding
fixed shade No. 3. No lens adjust-
arc. Adjust shade, sensitivity,
ments are possible.
and delay settings as needed.
X-Mode used for outdoor or low cur-
Cut Mode- used for cutting
rent welding applications. In this mode
applications. In this mode the
the lens turns on when it senses weld
lens turns on when it optically
current. Adjust shade, sensitivity, and
senses a cutting arc. Adjust
delay settings as needed.
shade, sensitivity, and delay
settings as needed.
X-Mode is not present on Perfor-
mance helmets.
Grind Mode- used for metal
grinding applications. In this
Nearby welding may affect helmet
mode the shade is fixed
operation when lens is in X-Mode.
shade No. 3. No lens adjust-
Stay at least 12 ft (3.7 m) away
ments are possible.
from other welding activity.
X-Mode - used for outdoor or
low current welding applica-
tions. In this mode the lens
turns on when it senses weld
current. Adjust shade, sensi-
tivity, and delay settings as
needed.
�
X-Mode is not present
on
helmets.
�
Nearby welding may af-
fect helmet operation
when lens is in X-Mode.
Stay at least 12 ft (3.7
m) away from other
welding activity.
OM-256476 Page 1
Performance
OM-256476 Page 9