Miller T94i Series Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Aksesori Sepeda Motor Miller T94i Series. Miller T94i Series 32 halaman. Auto-darkening helmets
Juga untuk Miller T94i Series: Panduan Pemilik (40 halaman)

Halaman Cetak
Miller T94i Series Manual
Specification
Viewing Field
Reaction Time
Available Shades
All Shades Provide
Continuous
UV And IR
Protection.
Sensitivity Control
Delay Control
Automatic Power Off
Low Battery Light
Power Supply
Sensors
Operating
Temperature
Storage
Temperature
Total Weight
Standards
Warranty
SECTION 3 − SPECIFICATIONS
Adjustable For Varying Ambient Light And Welding Arc
Slows Lens Dark-To-Light State Between 0.1 And 1.0 Seconds
Shuts Lens Off 45 Minutes After Last Arc Is Struck
Red LED Illuminates To Indicate 2−3 Days Remaining Battery Life
.
When Stored In Extremely Cold Temperatures, Warm Helmet To
Ambient Temperature Before Welding.
.
When Stored In Extremely Cold Temperatures, Warm Helmet To
Ambient Temperature Before Welding.
Three Years From Date Of Purchase (Section 12)
T94
T94i
3.81 x 2.62 in
(97 x 60mm)
0.0000500 sec (1/20,000)
Weld Mode
Darkened State: No. 8 − No. 13
Light State: No. 3
Cut Mode
Darkened State: No. 5 − No. 8
Light State: No. 3
Grind Mode
Light State: No. 3
X-Mode
Darkened State: No. 8 − No. 13
Light State: No. 3
Panasonic CR2450 Lithium Battery
(Miller Part No. 217043)
Independent/Redundant (Four)
14_F to 131_F / −10_C to +55_C
−4_F to 158_F / −20_C to +70_C
T94: 21 oz (595 g)
T94i: 25.7 oz (729 g)
Meets ANSI Z87.1+, CSA Z94.3
OM-255503 Page 7