Miller T94i Series Panduan Pemilik - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Aksesori Sepeda Motor Miller T94i Series. Miller T94i Series 40 halaman. Auto-darkening helmets
Juga untuk Miller T94i Series: Manual (32 halaman)

Halaman Cetak
Miller T94i Series Panduan Pemilik
SECTION 4 – SPECIFICATIONS
Specification
Viewing Field
Reaction Time
Available
Shades
All shades pro-
vide continuous
UV and IR
protection.
Sensitivity
Control
Delay Control
Automatic
Power Off
Low Battery
Light
Power Supply
Sensors
Operating
Temperature
Storage
Temperature
Total Weight
Standards
Warranty
OM-255503 Page 10
T94, T94i
3.81 x 2.62 in. (97 x 60 mm)
0.0000400 sec (1/25,000)
Weld Mode: Darkened State: No 8–
No. 13, Light State: No. 3
Cut Mode: Darkened State: No 5–
No. 8, Light State: No. 3
Grind Mode: Light State: No. 3
X-Mode: Darkened State: No 8–No.
13, Light State: No. 3
Adjustable for varying ambient light and welding arc
Slows lens dark-to-light state between 0.1 and 1.0 seconds
Shuts lens off 45 minutes after last arc is struck
Red LED illuminates to indicate 2–3 days remaining battery life
Panasonic CR2450 Lithium Battery
(Miller Part. No. 217043)
Qty 1
�
When stored in extremely cold temperatures, warm helmet to ambient
temperature before welding.
�
When stored in extremely cold temperatures, warm helmet to ambient
temperature before welding.
T94: 21 oz (595 g)
T94i: 25.7 oz (729 g)
Four years from date of purchase (see Section 13)
Weld Mode: Darkened State: No 8–
No. 14, Light State: No. 3
Cut Mode: Darkened State: No 5–
No. 8, Light State: No. 3
Grind Mode: Light State: No. 3
X-Mode: Darkened State: No 8–No.
14, Light State: No. 3
Panasonic CR2450 Lithium Battery
Independent/Redundant (Four)
14°F to 131°F (–10°C to 55°C)
–4°F to 158°F (–20°C to 70°C)
Meets ANSI Z87.1+, CSA Z94.3
T94i XL
4.41 x 2.95 in. (112 x 75 mm)
0.0000400 sec (1/25,000)
(Miller Part. No. 217043)
Qty 2
T94i XL: 28 oz (795 g)