Miller T94i Series Panduan Pemilik - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Aksesori Sepeda Motor Miller T94i Series. Miller T94i Series 40 halaman. Auto-darkening helmets
Juga untuk Miller T94i Series: Manual (32 halaman)

Halaman Cetak
Miller T94i Series Panduan Pemilik
SECTION 10 – MAINTENANCE AND
�
Do not use solvents or abrasive cleaning detergents to clean the helmet. Do not immerse
the lens assembly in water.
�
Keep helmet dry; do not expose helmet to rain or snow. Keep helmet away from fire and oth-
er sources of heat.
�
The auto-darkening lens uses sensitive electronics. Do not drop helmet or handle it in a
rough manner.
The helmet requires little maintenance. However, for best performance clean helmet after each
use. Using a soft cloth dampened with a mild soap and water solution, wipe the cover lenses
clean. Allow to air dry. Occasionally, the filter lens and sensors should be cleaned by gently wiping
with a soft, dry cloth.
Store helmet in a clean, dry, cool place free of solvent-based vapors. To prevent battery from los-
ing power, store helmet in helmet bag or in a dark location. Remove battery(s) if helmet will be
stored longer than six months.
End Of Useful Life
The welding helmet has no expiration date, and with proper care and maintenance it can provide
many years of eye and face protection. The helmet can continue to be used, provided that the hel-
met shell/shroud is undamaged (no cracks, gaps, or holes) and the lens functions normally
(switches from a light state to a dark state.)
OM-255503 Page 26
STORAGE