Miller Titanium Series Petunjuk Pengoperasian - Halaman 20

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Aksesori Sepeda Motor Miller Titanium Series. Miller Titanium Series 32 halaman. Auto-darkening w/infotrack
Juga untuk Miller Titanium Series: Manual (40 halaman)

Miller Titanium Series Petunjuk Pengoperasian

8-2. Replacing Batteries In Titanium 9400 Series Helmets

1
OM-246 377 Page 18
Be sure Positive
(+) side of battery
faces up.
To replace the batteries, re-
move the auto-darkening lens
assembly (see Section 7).
1
Battery Tray
After removing the lens assem-
bly, slide the battery holding
trays out and remove the old
batteries.
Replace with CR2450 lithium
type batteries (2 required) or
equivalent (Miller Part No.
217043).
.
Be sure Positive (+) side of
the battery faces up (to-
ward inside of helmet).
Reinstall the battery trays. To
test battery, press the Reset
button. The lens should flash
dark twice. Reinstall the lens
assembly.
.
Left and right battery trays
are not interchangeable.
The auto−darkening hel-
met will not work if battery
trays are installed on the
wrong sides.
OTOS / 804 847