AquaOne CPF 75000 Buku Petunjuk - Halaman 19
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Sistem Penyaringan Air AquaOne CPF 75000. AquaOne CPF 75000 19 halaman. Pond pressure filter
Troubleshooting
FAULT
Water not
1.
getting
2.
clear
3.
4.
too much.
4.
5.
UV
lamp
1.
indicator is
connected.
not on
2.
3.
4.
set at O or 12H.
No water
1. Function switch set to "clean".
discharge
2. Mains plug of the pump is not
from pond
connected.
inlet
3. Pump is blocked.
Product parameters
Max. flow-trough
UVC-Klärer
Ponds with fish
Decorative ponds
Size (mm)
Actual volume
Outlet/Inlet
By Aquaristikwelt24
POSSIBLE REASON
Unit not been used for long.
Low pump flow.
Water is extremely dirty.
Fish and animal population is
Filter sponges are too dirty.
Quartz glass tube is too dirty.
Main plug of filter not
Defective UV lamp.
Faulty connection.
The turn-on time of UV lamp is
CPF 20000
12000 l/h
36 Watt
20000 l
40000 l
450x450x550
50 l
32/38/50 mm
www.aquaristikwelt24.de
1.
Full effectiveness of
biological cleaning is only
reached after a few weeks.
2.
Reset flow rate or replace
pump
3.
Remove algae and leaves
from the pond, or change the
water.
4.
Guideline: aprrox 1 kg fish
to every 1000 CBM of pond
water.
5.
Clean the filter sponges.
6.
Clean the quartz glass
tube.
1. Connect the mains plus of
the filter.
2. Replace the UV lamp.
3. Check the electrical
connection.
4. To reset the turn-on time of
UV lamp.
1. Reset function switsch to
‚filter'.
2. 2. Connect the mains plug
of the pump.
3. Clean the pump.
CPF 30000
CPF 50000
12000 l/h
13000 l/h
55 Watt
55 Watt
30000 l
40000 l
60000 l
80000 l
450x450x715
600x600x815
75 l
32/38/50 mm
32/38/50 mm
MEASURES
CPF 75000
13000 l/h
55 Watt
50000 l
10000 l
750x750x880
170 l
300 l
32/38/50 mm
19 |
S e i t e