3B SCIENTIFIC ATLAS THE ALS SIMULATOR P75 Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Medis 3B SCIENTIFIC ATLAS THE ALS SIMULATOR P75. 3B SCIENTIFIC ATLAS THE ALS SIMULATOR P75 18 halaman.

Halaman Cetak

ATLAS THE ALS SIMULATOR P75

FAQ

My Atlas is unable to connect to REALITi?

Cause

Incorrect Wi-Fi Network selected

REALITi 360 App is not updated

Atlas not turned on

Atlas battery low

Atlas too far from Wi-Fi

My connection with REALITi and Atlas is lost?

Multiple network connections may interfere with transmissions between REALITi and Atlas.

Forget other networks on both your iPads beside the network required to connect with Atlas. Default network is "iSimulate-5.0"

How to change the Wi-Fi setting on Atlas?

Refer to the 'Additional Information (How to change the Wi-Fi setting on Atlas?).'

NOTE: The steps are also available on page 15 of the Atlas manual.

Atlas airways have become contaminated from mouth-to-mouth resuscitation

DO NOT perform mouth-to-mouth on Atlas. If damage is reported:

• Clean the outside of Atlas with manikin wipes.

• Clean the inside of the oral cavity with manikin wipes.

• Change the lung bag.

No chest rise visible on Atlas

• If chest-rise is unilateral, ETT may be inserted into the right main stem bronchus. Correct the insertion of the ETT.

• Lung bag is leaking or tubing to lung is twisted, kinked, or disconnected for which the lung bag will need to be replaced.

• Seal the airway.

• Check air tubing for leakage.

• Check that all connections are intact.

• Replacing tubing if necessary.

Atlas carotid pulse can not be felt

The following may be the cause:

• The blood pressure is set below 50mmHg Systolic.

• The connection is lost between the REALITi 360 system and Atlas.

• Non-perfusing cardiac rhythm

• PEA rhythm

ATLAS THE ALS SIMULATOR P75 | FAQ

Solution

• Connect to the correct Wi-Fi on both iPads

NOTE: Default SSID Wi-Fi "iSimulate-5.0"

Default password is "iSimulate2012"

• If operating more than one Atlas, ensure that each simulator has its own unique SSID name. If

operating more than one Atlas, ensure each simulator has its own router/network to connect to.

NOTE: After 15 minutes of not being able to connect, Atlas will temporarily revert to the default SSID and

Password to allow you to rename the connection Wi-Fi and Password.

NOTE: Follow the procedure from the Quick Start Guide

(How to connect Atlas with REALITi360?)

Go to the App Store on both your iPads and update the REALITi 360 app to the latest version

available

Turn Atlas off and on again

Charge Atlas

Move your network and REALITi system closer to Atlas