BURL B32 VANCOUVER Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Perekaman BURL B32 VANCOUVER. BURL B32 VANCOUVER 7 halaman. Mix bus

B32 VANCOUVER QUICK START

continued

POWER UP

Plug the B32 into AC mains power. Turn on the power switch on the front panel, verify the blue power LED is illuminated.

Power down unit.

CONNECT INPUTS AND OUTPUTS

Connect the outputs of your D-A converter to the DB-25 inputs on the rear of the B32. Connect the XLR outputs of the

B32.

(For routing diagram see page 6)

NOTE: We recommend connecting MIX 1 directly to your Monitor Controller using high quality XLR cables, and all

other inputs and mix outputs connect to a patch bay. This allows for quick and flexible routing.

TIPS:

We recommend starting with the attenuators at 0, BX5 and +6 disengaged.

Listen to your mix with the unit zeroed out.

Start to experiment to find the sweet spot

Add BX5 output transformers.

Add +6 dB Gain and attenuate the B32 down 6dB on each side.

NOTE: When mixing back into a Burl Audio B2 Bomber or Mothership experiment with the output level of the

B32, to saturate the input transformers more or less.

Enjoy!

Burl Audio products are all Class-A, discrete circuits, with no capacitors in the signal path, made in Santa Cruz CA.

Hear the difference. Feel the love.

TRANSPARENCY

SWITCHABLE TONALITY

GAIN BOOST

DEPTH

WARMTH

CLARITY