Aquaport AQP-3TAP-D Panduan Pengguna & Garansi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna & Garansi untuk Dispenser Aquaport AQP-3TAP-D. Aquaport AQP-3TAP-D 8 halaman.

CLEANING

Switch off the power supply and unplug the power cord from the

wall socket before following the instructions below.

Cleaning & Draining:

It is recommended that the unit is disassembled and cleaned every 2-3 months.

•

Remove bottle supporter and spike, twist anti-clockwise and lift and Hand wash

•

Pull out inner float (or baffle) and hand wash.

•

Wash the stainless steel tank reservoir and rinse out. Drain all water out through the

rear drain plug with a bucket. DO NOT GET ANY WATER ON THE UNIT.

Attention:

The machine heats water to a temperature of approximately 90˚C, it can cause severe

burns. Please operate the machine carefully.

Sanitation:

The machine should be sanitized with bi-carb soda or Aquaport Sanitising Sachets.

This should be done every 3 months.

Contact Aquaport on 1300 764 325 should you wish to purchase sanitising sachets.

To Remove Mineral Deposits:

Mix 4 litres of water with 200g citric acid crystals, pour into machine and make sure

the water can flow out of the hot tap. Switch on the power and heat for about 10

minutes. 30 minutes later, drain off the liquid and clean the machine with water 2 to 3

times. Generally this should be done every 3 months. Never disassemble the machine by

yourself to avoid damaging the machine.