CHROMOFLEX Pro 66000031 Buku Petunjuk - Halaman 6
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kontrol Jarak Jauh CHROMOFLEX Pro 66000031. CHROMOFLEX Pro 66000031 6 halaman. 1/2 channel
Halaman Cetak6. Networking
A basic application is using one
to be set on the same net. This is also the default factory setup mode (default: network 10). When using the
software "ProCEd", various groups can be set to control several nets independently.
The remote control responds to all units within radio range. If the master is out of this range, it will proceed sending
his settings to the slaves. Therefore, it is important that the master is within the range of the remote control.
Fig. 3
Note about the range: The Radio Remote Control has a less strong antenna than the
units or the USB dongle. Normally the range of the Radio Remote Control is below the range of the master to the
other units.
7. Contents
®
Every
CHROMOFLEX
Pro
the equipment to which they relate and must be handed to the user.
®
CHROMOFLEX
Pro
USB dongle (66000036) and
66000041; 66000042; 66000341; 66000342) are optional accessories.
Important note: Complete manuals for any
inform yourself for updates before use.
8. Contact
Josef Barthelme GmbH & Co. KG
Oedenberger Str. 149
D-90491 Nürnberg, Germany
Tel: +49 (0) 911 42 476 0
Mail
Subject to technical changes
V1.1 / 13.01.2015
®
CHROMOFLEX
Pro
and either remote control or USB dongle. Both units have
remote control is shipped with this manual. The instructions are an integral part of
CHROMOFLEX
6 / 6
Remote control responds to
all units within radio range
®
CHROMOFLEX
Pro
units (66000031; 66000032;
®
can be downloaded at
CHROMOFLEX
®
CHROMOFLEX
Pro
www.barthelme.eu
. Please
®
Remote
Pro