CHROMOFLEX Pro Series Buku Petunjuk - Halaman 10
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pengontrol CHROMOFLEX Pro Series. CHROMOFLEX Pro Series 10 halaman. 1/2 channel
Juga untuk CHROMOFLEX Pro Series: Buku Petunjuk (6 halaman)
Halaman Cetak7.3 Pin resetting
For resetting the pin you have to open the device. After that you can reset the pin with the jumper shown in fig. 5
To do this please proceed as follows:
®
1. Disconnect
CHROMOFLEX
Pro
Bluetooth from power supply respectively turn device off
2. Open the housing
3. Put the jumper to position „Pin Reset" (pin 2+3)
4. Reconnect the power supply respectively turn device on
5. Wait until status LED go out (about 4s)
6. Disconnect power supply respectively turn it off
7. Set jumper back to „Normal" operation (pin 1+2)
8. Close the housing again
Fig. 5
8. Contents
®
Every
CHROMOFLEX
Pro
Bluetooth unit is shipped with this manual. The instructions are an integral part of
the equipment to which they relate and must be handed to the user.
®
Important note: Complete manuals for any
CHROMOFLEX
can be downloaded at www.barthelme.eu. Please
look for updates before installation.
9. Contact
Josef Barthelme GmbH & Co. KG
Oedenberger Str. 149
D-90491 Nürnberg, Germany
Tel: +49 (0) 911 42 476 0
Mail
Subject to technical changes
®
V 1.1 / 19.03.2014
10 / 10
CHROMOFLEX
Pro
Bluetooth