Burley 9514 Petunjuk Pemasangan & Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Panduan Pengguna untuk Kompor kayu Burley 9514. Burley 9514 20 halaman.

Commissioning the Appliance

On completion of the installation, when any fire cement or paint used has dried, a smoke

'bomb' should be burnt and all joints checked for smoke leakage and the chimney draw

checked with all doors and windows closed. Please leave the instructions with the

customer and inform them;-

The first time the stove is lit only a small fire should be used to allow the paint to cure

properly.

Ventilate the room well as the fumes can be pungent.

Use a small amount of kindling to start the fire. If possible leave the door on the catch,

although the fire looks fierce it is comparatively cool due to all the air being drawn in. Add

a little more kindling as it burns down. When you have a small bed of embers place a

small split log in the fire, allow it to catch well, and then close the door with the lever to

the right. Stay with the fire during this process.

When this first log is burning down add another log, when this one is burning well you

should be able to move the lever midway to the centre. Keep feeding the stove for three

hours with a small split log as it burns low.

When you need to remove some ash wait until it is cold and then take some out using the

scoop provided. Always leave an inch of ash so you have a nice bed for your next fire.

Page 12 of 20