Burley NOMAD RACK Petunjuk Pemilik & Manual Keselamatan - Halaman 6

Jelajahi secara online atau unduh pdf Petunjuk Pemilik & Manual Keselamatan untuk Kendaraan Utilitas Burley NOMAD RACK. Burley NOMAD RACK 12 halaman. Bicycle trailer
Juga untuk Burley NOMAD RACK: Brosur & Spesifikasi (5 halaman), Panduan Pemilik & Panduan Keselamatan (20 halaman), Petunjuk Pemilik dan Manual Keselamatan (18 halaman), Petunjuk Pemilik dan Manual Keselamatan (12 halaman), Panduan Pemilik dan Keselamatan (4 halaman), Petunjuk Pemilik dan Manual Keselamatan (11 halaman), Panduan Pemilik & Keselamatan (20 halaman)

Halaman Cetak
Burley NOMAD RACK Petunjuk Pemilik & Manual Keselamatan

Installing Tailgate and Splashguard

Nomad:
1. Loop tie-down straps over corners of side panels and
join male buckle sections on straps to female buckle
sections inside trailer.
2. To accommodate different sizes of cargo, tighten or
loosen the webbing straps as needed.

Installing Roll Bar and Cover

Nomad:
1. Place cover over side panels, with "Nomad" logo at trailer
front.
FIGURE 3
2. Slip one roll bar knob through a grommet on
cover.
FIGURE 3
3. Slide roll bar through casing in divider, and match roll bar
end with its corresponding hole on side rail.
4. Thread roll bar knob through side rail, and tighten.
5. Repeat for knob on other side.
6. Loop O-rings on cover over trailer frame tube ends.
Make sure cover extends over top of side panels.

Installing Tow Bar

1. Slide tow bar through both tow bar mounts on left side.
2. Match rear tow bar hole with rear mount hole.
3. Insert the retaining pin through both holes, and lock
retaining hoop securely.
6
B U R L E Y N O M A D A N D F L A T B E D O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L
FIGURE 3 & PHOTO 7
PHOTO 7
PHOTO 8 & PHOTO 9
Trailer
Rear
PHOTO 7
Tailgate
Trailer Frame
FIGURE 3: NOMAD
Tow Bar Mounts
PHOTO 8: NOMAD TOW BAR INSTALLATION
Buckle
Webbing Strap
Side Rail
Roll Bar
Cover Grommet
Roll Bar Knob
O-Ring
Webbing Strap
Splashguard
Retaining Pin
Trailer Front