Diamond TMS10S Panduan Servis - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Servis untuk Peralatan Makanan Komersial Diamond TMS10S. Diamond TMS10S 6 halaman.

Halaman Cetak

C. REFRIGERATING UNIT EXTRACTION

C1. Move all the alluminium rods

towards left or unscrew them

(depends on the model)

C4. Unscrew the screws holding

the alluminium tray for the

condensation drip.

D. POWER SUPPLY REPLACEMENT

D1. Extract the defective power

supply (secured on the tank's

inner lining)

E. LEDS REPLACEMENT

RGB LED LIGHTS

E1. Loosen terminal screws to

connect the LEDS from the

controller

C2. Unscrew all the bolts and

remove central alluminium

pannel right side

C5. Extract the alluminium tray

(OPERATION A TO B ACCOMPLISHED FIRST)

D2. Disconnect the power supply

from the wiring

(OPERATION ON POINT A TO BE ACCOMPLISHED FIRST)

E2. Extract the broken LED strips

from the guide, using a

screwdriver

(OPERATIONS ON POINTS A - B TO BE ACCOMPLISHED FIRST)

C3. After removing all the

plastic clips extract all the

alluminium rods from the right

compartment of the unit display

C6. Unscrew the screws holding it

and extract the cooling unit

BROWN

BLUE

YELLOW-GREEN ➡

BLACK

RED

D3. Connect the new power supply

as above

E3. Insert the new LED strips in the

aluminium profiles and extract

the 4 cables from the holes in

the basin

ENGLISH

➡ PHASE ( L )

➡ NEUTRAL ( N )

➡ 12 V - ( - V )

➡ 12 V + ( + V )

E4. Connect the new LEDS to the

receptor cable as they were

before matching the colors