Burmester 035 Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Burmester 035. Burmester 035 16 halaman.

The SETUP menu of the pre amplifier 035 allows the easy programming of certain basic settings as well as a host of

special functions.

NOTICE: While the SETUP menu is active the VOLUME knob (6) on the front panel of the 035 serve to change the

settings of the various menu items. During this procedure the volume level of the 035 cannot be changed.

Activating SETUP

Press the button SETUP (7) on the front panel to get into the SETUP menu. The

alphanumeric display shows SETUP (blinking) followed by the first menu item (see table

below).

Select menu item

The different items on the setup menu are selected in the sequence specified in the table

below by repeatedly pressing the SETUP button (7).

The activated menu item is indicated on the left side of the alphanumeric display (5).

Change settings

To change the setting of an activated menu item rotate the VOLUME knob (6) to the left to

lower the set value or to the right to increase the set value.

The selected value of the menu item is indicated on the right side of the alphanumeric

display (5).

The selected value of any menu item will be saved immediately.

Deactivating SETUP

The SETUP menu is closed automatically after a few seconds when no adjustment is made.

The alphanumeric display (5) shows SETUP-OK (blinking) followed by the selected input

and the volume level.

The selected value of any menu item will be saved immediately.

SETUP MENU