Diamond P CAR20 Series Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Diamond P CAR20 Series. Diamond P CAR20 Series 9 halaman.
Halaman Cetak
6. PROBLEM SOLUTION GUIDE
For information or assistance related to the use of the product write an email to: [email protected]
Problem
The unit display does not
turn on
The unit does not cool
enough
Bad smell inside the display
Hearing some noise
The upper part is not cold
Condensation on doors,
rails or frame
The doors do not close properly
Any led lights turns on
A single led strip or a part
of it does not work
Maintenance and repair work must be performed by qualified personnel.
Before carrying out any operation disconnect the showcase from the socket
The following documents are available on the internet website www.exposrl.com
Document type
Exploded view
Wiring diagram
User instructions
Assembling instructions
6. DISPOSAL OF END-OF-LIFE EQUIPEMENT
In accordance with art.13 of Legislative Decree of 25 July 2005, n.151 "Implementing Directives 2002/95/CE, 2002/96/CE and 2003/108/CE, concerning the
reduction of the use of hazardous substances in electrical and electronic equipment, as well as waste disposal".
At the end of its life cycle the product must be disposed separately from other waste.
Illegal disposal of the product by the owner involves the application of administrative sanctions provided by law.
This product complies with D.E. 2002/96/CEE RAEE e 2002/95/CEE RoHS
The symbol on the product and manuals indicates that the product at the end of the life cycle should not be disposed with other waste.
To prevent possible harm to the environment or human health caused by the incorrect disposal of waste, the user is encouraged to give this product to
authorized persons in accordance with local regulations.
For all the information about separate collection of this type of materials, the household users should contact either the dealer from whom they acquired
the product or the competent authority.
Professional users (companies and professionals) should contact their supplier and check the terms and conditions of the purchase contract. This product
and its electronic accessories should not be disposed with other commercial wastes
Potential cause
The unit is disconnected
General switch deactivated
Faulty thermoregulator
The ambient temperature is too high
The doors get frequently opened
The doors are not completely well closed
The showcase is exposed to sunlight
The thermoregulator isn't set correctly
An excessive amount of products is kept in the display
AU2 Alarm – The space under the unit has been blocked
AU2 Alarm – The ambient temperature is too high
The cooling system is broken
Presence of rotten food or food with strong odors
The display does not stand on an even surface
Something dropped behind or underneath the showcase
Clicking sound coming from the inside
Inside fans are off
Inside fans are broken
Ambient humidity is very high
The set temperature is too low
The door was left open
The display does not stand on an even surface
The lights key is off
Power supply or controller are faulty
The led strip is faulty
www.exposrl.com >> technical area >> Spare parts and exploded views
www.exposrl.com >> technical area >> electric wiring
www.exposrl.com >> technical area >> user instructions
www.exposrl.com >> technical area >> assembly instructions
Pay attention to complete and correctly close the doors
Clean the display internally and remove food residues
It is normal, it is due to the expansion of some elements
Switch on the internal fan button on the thermo-regulator
Eliminate cause or switch on the frame heating
Level the showcase by adjusting the levelling feet
Browser link
ENGLISH
Solution
Check the connection to the wall socket
Check the power supply on the socket
Turn on the main switch
Contact the technical assistance center
Eliminate the cause
Eliminate the cause
Place in a cool and well-ventilated room
Check the set-point of the thermoregulator
Do not fill excessively the showcase
Free this space to allow a proper ventilation
Eliminate the cause
Contact the technical assistance center
Placing food in airtight containers
Carry out a proper installation
Check and remove the object
Contact the technical assistance center
Raise the temperature
Carefully check that the doors are closed
Switch on the lights key
Contact the technical assistance center
Contact the technical assistance center
File name
PARETE1(EV)
PARETE2(EV)
TECA1(EV)
TECA2(EV)
PARETE-A (SE)
PARETE-B (SE)
PARETE-TECA (MI)
PARETE-A (IM)
PARETE-AB (IM)