Burmester 082 Panduan Pemilik - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Burmester 082. Burmester 082 16 halaman. Classic line

Adjusting the

The tone control allows increasing or decreasing bass and treble output in 2dB steps from

tone control

plus to minus 14dB and an adjustment of the stereo balance in 1dB steps up to –60dB.

Pressing and holding the button labeled TONE (10) switches into the tone control mode.

The menu items treble, bass and balance can be called up sequentially by briefly pressing

the TONE button.

TREBLE ADJUSTMENT:

BASS ADJUSTMENT:

BALANCE ADJUSTMENT: The display shows BAL

The tone control mode is automatically terminated after 10 seconds without any adjustment.

The selected settings are retained when leaving the tone control mode.

Activating the

In normal operation the signal path by-passes the tone control completely.

Tone control

To switch the tone control into the signal path, press the button TONE (10) briefly. The

TONE LED (4) illuminates, when the tone control is activated.

To switch the tone control off, press the button TONE (10) briefly again and the TONE LED

(4) will go out.

The 067 remote control is delivered with the 082. By definition the buttons POWER, TUNER, TAPE, SURR, AUX,

have the same functions as the corresponding control buttons on the front panel of the amplifier 082.

With repeatedly pressing the AUX key you can change between the inputs AUX1 and AUX2.

The DISC button has the same function as the CD button on the front panel. By pressing the MENU button you

activate the SETUP menu. The MONITOR button does not exist on the remote control.

Pushing the DIM button on the remote control, varies the brightness of the display in four steps between "max.

brightness" and "off".

If brightness is selected to "off", the display will light up only when any controls are used to change settings. After a

few seconds it automatically switches off again.

The buttons VOLUME + and VOLUME – adjust the volume control. When the tone control menu or the setup menu

is activated, you can change the settings of the selected menu item with the VOLUME buttons.

All other keys on the remote control have no functions with respect to the 082.

The display shows TRBL ....

Use the VOLUME knob (8) to adjust the treble between +14dB

and –14dB.

The display shows BASS ....

Use the VOLUME knob (8) to adjust the bass between +14dB

and –14dB.

Use the VOLUME knob (8) to adjust the stereo balance.

The BALANCE function lowers the volume in the left or right

channel in 60 steps up to –60dB. An arrow in the display

indicates, if the volume level of the left or the right channel is

being changed.

REMOTE CONTROL

....