Burmester 061 Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pemutar CD Burmester 061. Burmester 061 20 halaman.

HOOKUP TO AN ANALOG AMPLIFIER

Analog outputs

To connect an analog amplifier or receiver the 061 offers balanced as well as unbalanced

outputs. If your amplifier or receiver provides balanced inputs connect them to the terminals

BALANCED R (29) and BALANCED L (32). Unbalanced connections can be made using

the terminals UNBAL (30). An analog recording device may be hooked up to the terminal

TAPE (31).

For reasons of superior sound we recommend using balanced connections whenever

possible.

The pinning of the balanced outputs are: PIN1=GND, PIN2=NEG, PIN3=POS.

ADDITIONAL CONNECTIONS

MMI slot (optional)

The MMI slot (19) offers to integrate future developments into the CD player 061, for

example a multi media interface.

REMOTE

Connecting DC OUT (22) to the corresponding DC IN-jack of another BURMESTER-unit

offers to switch on or off this other unit simultaneous by the 061. In this case, 061 has the

master function.

Connecting DC IN (23) to the corresponding DC OUT-jack of another BURMESTER-unit

offers to switch on or off the 061 simultaneous by the other unit. In this case, 061 has the

slave function.

BURLINK(optional)

To the BURmester-LINK interface plugs (17), (18) a computer system like PC,

CRESTRON

allows a comfortable control of your hifi system using an individual programmable touch

panel for example. With the LEDs beside the plugs named T and R (Transmit and Receive)

you can check whether data exchange is working.

The BURLINK module is available on request at your local dealer.

, Nevo e.g. can be connected to the CD player 061. The computer system