Chrysalis STARFIRE-12 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Subwoofer Chrysalis STARFIRE-12. Chrysalis STARFIRE-12 17 halaman. Starfire series
Juga untuk Chrysalis STARFIRE-12: Panduan Pengguna (17 halaman)

Halaman Cetak

E A R

A N E L

Figure 1. Starfire-10 and -12 Rear Panel Connections

Figure 1 shows the connections on the rear panel of the Starfire. Following are brief descriptions of the connections described in Figure 1.

(1)

SPEAKER LEVEL INPUT terminals - Connect these input terminals to the speaker output terminals of your amplifier

or receiver.

(2)

SPEAKER LEVEL OUTPUT terminals - The speaker-level signal to the front speakers is output from these terminals.

(3)

LINE INPUT jacks - Connect these jacks to the LINE OUT jacks of the amplifier.

(4)

LOW-PASS CROSSOVER - Use this knob to select the high-frequency range at which you wish to cut-off the signal to

the subwoofer.

(5)

Power indicator - Red: Unit is in standby mode. Green: Unit is in operation mode. (automatically turns to STANDBY

mode if no signal for eight minutes)

(6)

PHASE switch - Select the switch position at which you hear a louder mid-bass sound.

(7)

VOLUME LEVEL knob - Use this knob to adjust the output level of the subwoofer.

Starfire Series Manual

w w w . c h r y s a l i s a c o u s t i c s . c o m

O N N E C T I O N S