Aquasana EQ-AST-WH Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Penyaringan Air Aquasana EQ-AST-WH. Aquasana EQ-AST-WH 12 halaman. Whole house salt-free water conditioner
Juga untuk Aquasana EQ-AST-WH: Petunjuk Instalasi (5 halaman), Panduan Pemilik (12 halaman)

Halaman Cetak

INSTALLATION STEPS

Install Shut-off Valve and Ensure Spacing

1. Using a pipe cutter, cut into the main water supply line to install

the shut-off valve.

2. Loosely fit shut-off valve to calculate proper spacing of components.

3. Measure distance for Pre-Filter, Salt-Free Water Conditioner tank,

and optional add-ons (Rhino Tank, Post-Filter, and UV) and mark

pipe accordingly.

If you're installing additional add-ons make sure to read through

those separate installation manuals prior to fully installing your

complete system.

NOTE: DO NOT cut more pipe than necessary. You can cut more pipe

later if needed. If you're also installing a Pro-Install Kit or bypass loop,

do so at this time.

Ensure proper spacing to fit Pre-Filter, Salt-Free Water Conditioner,

Incoming

water supply

Cut Pipes

Cut pipe along the marked sections from step

5 and clean ends of pipe. Ensure there are no

burrs, sharp edges or deep scratches.

NOTE: Cut tubing as straight as

possible with a utility knife, or

an appropriate pipe cutter for

copper tubing or PVC.

and any optional add-ons

Outgoing

water supply