Aquasana High-Flow Pro Series Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Sistem Penyaringan Air Aquasana High-Flow Pro Series. Aquasana High-Flow Pro Series 8 halaman.

5. Plumb to connect ¾" NPT connections

a) Connect inlet + outlet ports of High-Flow Systems to water consuming equipment being fed.

b) Use an industry approved pipe dope or Teflon

c) Always use a wrench on all the fittings to avoid undue stress on system components.

d) Careful when sweating joints not to damage elastomeric components.

6. Plumb to connect to beverage center if applicable

a) Plumb to exit port of "H" Adapter if feeding

water to a carbonated beverage products.

b) Special line must run from exit port shown

directly to beverage center.

7. Install twist and lock cartridges as shown

Each cartridge will "click" into place when fully engaged after quarter turn.

8. System check and flush

a) Check all connections and proceed to turn on water supply.

b) Once system is pressurized, check for leaks.

c) Open flushing valve and flush the cartridge(s) by running water through at full force for

approx. 5 minutes. This will purge the system free of air and flush any fines, ensuring

maximum filter life and high performing water at startup.

d) After flushing, the system is ready for operation and usage.

tape at all connections.

Exit port

3/8" FNPT