3B SCIENTIFIC PHYSICS Escola 10 Lembar Instruksi

Jelajahi secara online atau unduh pdf Lembar Instruksi untuk Multimeter 3B SCIENTIFIC PHYSICS Escola 10. 3B SCIENTIFIC PHYSICS Escola 10 4 halaman.
Juga untuk 3B SCIENTIFIC PHYSICS Escola 10: Lembar Instruksi (6 halaman)

Halaman Cetak

3B SCIENTIFIC ® PHYSICS

Instruction sheet

01/13 ALF

The Escola 10 multimeter conforms to the safety

requirements for electrical equipment for meas-

urement, control and laboratory use in DIN EN

61010 part 1. Safe operation of the apparatus is

guaranteed with correct handling. However, safety

is not guaranteed if the apparatus is handled im-

properly or carelessly.

•

Read this manual carefully before using the

multimeter and follow the instructions!

The multimeter may only be used by people who

are aware of the dangers of electric shock and are

able to take the necessary safety pürecautions.

•

Whenever measurements are being made,

in which there is a danger of electric shock,

a second person should always be informed.

•

Before using the meter, check the case and

test leads for any damage. In the event of any

Multimeter Escola 10 1006810

1. Safety instructions

malfunction/operational defect or visible dam-

age, do not use the meter. Pay particular at-

tention to the insulation surrounding the

measurement sockets.

•

Use with caution when working above 30 V

AC rms, or 60 V DC. Such voltages pose a

shock hazard.

The limit of the measurement range must

•

not be exceeded. If the values of the meas-

urand are unknown, always switch from a

higher measurement range to a lower one.

•

Do not conduct measurements in a humid

environment. Work area, hands, shoes and

floor must be dry.

•

When measuring current, turn off circuit

power before connecting the meter in the

circuit.

1 Meter display with mirror

scale

2 Slotted screw for zero

calibration

3 Adjustment knob for zero

calibration

4 Measurement range dial

5 Operating mode switch

6 Voltage measurement

socket

7 Current measurement

socket for up to 3 A

8 Current measurement

socket for up to 10 A

9 Safety ground socket