Panasonic AG-3DP1 Manual - Halaman 8

Jelajahi secara online atau unduh pdf Manual untuk Camcorder Panasonic AG-3DP1. Panasonic AG-3DP1 14 halaman. Integrated twin-lens 3d camera recorder

Halaman Cetak

-c

ulti

GENLOCK IN and TC IN/OUT Terminals Support

Multi-Camera Shooting

Genlock and time code (TC) input terminals let you synchronize

multiple cameras for both editing use and live-relay shooting. An

SMPTE time code generator/reader is built-in. TC IN/OUT terminals

allow isolated camera-through connection. The genlock input

terminal also makes it possible to externally lock the time code.

Supports Camera Extension System

The existing AG-CA300G/BS300/EC4G Camera Studio System for

P2HD camera recorders is also supported, making it quick and easy

to build a system for a 3D live relay and 3D image acquisition

system using multiple cameras.

Two BNC cables allow the transmission of high-quality HD digital

images, return images, tally signals, mic signals, and genlock signals

over a cable length of 100 meters (328 feet) maximum. A special

cable can be used to supply power to the camera.* For 3D image

transmission, AG-3DP1 needs to be connected separately with dual

HD SDI cables.

*Power can be supplied only when the AG-BS300 Base Station is driven by an AC power

source. A separate power cord is also required between the AG-BS300 Base Station and

the AG-CA300G Camera Adaptor.

3D Video Output L (HD SDI)

3D Video Output R (HD SDI)

Monitor Output (HD SDI), 3D Assist etc.

G/L, Return Video, Tally (HD)

AG-CA300G

AG-3DP1

max. 100m (328 feet)

Remote Control-Ready

The AG-EC4G Extension Remote Control Unit or AJ-RC10G Remote

Control Unit* offer both studio use and direct connection to the

AG-3DP1. They let you adjust camera images right from where you

are, and even control convergence.

*The remote control unit can control only functions supported by the AG-3DP1. It cannot

control unsupported keys or dials.

10P Cable (10 m (33feet) / 50 m (164 feet))

Camera Image

Remote Control

AG-3DP1

amera

ersatility anD

Switcher etc.

AG-BS300

Monitor

Output

(HD SDI)

BT-LH910G

G/L

AG-EC4G

Remote Controller AJ-RC10G or

Extension Control Unit AG-EC4G

Shown above is a sample of operation style.

ther

ystem

unctions for

3D-Compatible Camera Remote Terminal

A remote terminal (super mini-jack) on the AG-3DP1 also supports

remote control of focus, zoom, iris, convergence, and recording start/

stop. The AG-3DA1's remote control can be used.

HD SDI Simultaneous Output with Sync-Rec Function

HD SDI Left/Right terminals on the AG-3DP1 allow camera-through

or playback of left-channel/right-channel FULL HD 3D image

outputs (simultaneous). This enables 3D images to be monitored on

a BT-3DL2550 3D Video Monitor. When an external recorder is

connected, line recording of camera-through FULL HD 3D video

signals is also possible.

HDMI 3D Output

The AG-3DP1 features an HDMI output terminal that outputs FULL

HD 3D video signals for viewing on a 3D video monitor. This terminal

outputs camera-through signals or left-channel/right-channel FULL

HD 3D playback signals.

*HDMI output and HD SDI output cannot be used simultaneously.

AG-3DP1

Optional Color and Black-and-White Viewfinders

The optional AJ-CVF100G HD Color Viewfinder employs a 25.4 mm

(1 inch) 1,500,000-dot-equivalent (960 x 540 x 3 [RGB])

transmission-type LCOS (Liquid Crystal On Silicon) to achieve high

resolution, high brightness and high response. It helps to reduce the

possibility of white balance adjustment errors and other errors in

recording. The 3D Assist functions can be checked in colors.

The optional AJ-HVF21KG 50.8 mm (2 inches) Black-and-White HD

Viewfinder can also be used.

Unislot Wireless Receiver Supported

An optional slot-in wireless receiver is supported, including

2-channel wireless receivers.

XLR Audio Input Terminals

An XLR 5-pin mic terminal is provided at the front, and two

channels of XLR 3-pin audio input with +48V phantom

power supply are provided at the rear for versatile audio

recording use.

A Wide Range of Functions for Image Acquisition

• Back Tally & Rear Tally.

• Earphone terminal (mini-jack) and speaker.

• Multiple battery support, including Anton Bauer or

IDX batteries.*

*The V-mount battery plate is required for IDX batteries.

roaDcast

HD SDI dual output

(simultaneous system)

BT-3DL2550 etc.

3D LCD Video Monitor

(HD SDI Input)

HD SDI dual output

(simultaneous system)

External recorder (s)

HDMI 3D output

3D TV/Video Monitor