Panasonic AG-DVC 200E Panduan Petunjuk Pengoperasian - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Camcorder Panasonic AG-DVC 200E. Panasonic AG-DVC 200E 44 halaman. Digital video camera recorder

Halaman Cetak

Preparation

Using a battery pack made by

Anton Bauer

Before use, charge the battery pack using the exclusive battery

charger made by Anton Bauer.

For the charging time and other details, refer to the operating

instructions of the battery charger used.

Attach the battery pack made by Anton

Bauer.

Power output connector for lighting

A battery holder made by Anton Bauer is equipped with a power

output connector for the lighting and a lighting control switch to

enable a light to be easily attached. For details on the lighting

systems available, contact Anton Bauer.

Insert the battery pack and slide it in the

direction of the arrow.

Release lever

To remove the battery pack, slide it in the opposite direction to the

one in which it was attached while keeping the release lever on the

battery holder pulled down all the way.

Set the battery type.

Select the battery type using <BATTERY> on the sub-menu

screen.

Example: Select "NiCd13" if the TRIMPAC13 is to be used;

select "NiCd14" if the TRIMPAC14 is to be used.

(See page 34)

Battery pack made by Anton Bauer

Lighting control switch

Using the NP-1B battery pack

made by Sony

Before use, charge the battery pack using the exclusive battery

charger made by Sony.

For the charging time and other details, refer to the operating

instructions of the battery charger used.

Remove the battery holder.

Refer to step 1 on page 10.

Attach the battery made by Sony to the

unit.

Mounting

connector for

NP-1B

First, remove the battery holder cover.

1 Attach the mounting connector for the NP-1B.

2 Use the mounting screws to mount the battery case.

3 Tighten the screw for the power supply contact.

4 Insert the top of the cover in the direction of the arrow.

5 Align the hole in the bottom of the cover (metal part) with the

hole in the bottom of the battery case, and attach using the

screw provided with mounting connector for NP-1B.

Set the battery type.

Select the battery type using <BATTERY> on the sub-menu

screen.

Select "NiCd12" if the NP-1B is to be used. (See page 34)

11 (E)

Battery case

Screw provided

with mounting

Hole

connector for

NP-1B

Cover